MateSaver ^TM

MateSaver^TM is a brand new concept with regard to safety in the cockpit.   This innovative product is designed specifically for the wireman and gaff man during record fly fishing, tournaments and big fish encounters.

Regardless of how strong you are, or how talented you are in the cockpit, accidents do happen. To the big game boat owner: "How would you feel if you watched your mate go overboard?" Of course that question does not need an answer. The entire fishing industry is aware of the ever present danger of entanglement and being pulled into the water any time you are involved in wiring big fish.

Meets all ORC specifications.  Made of 2" nylon webbing which is both weather and UV resistant.  Welded stainless steel "D" rings on the back provide a secure attachment point.  The 2" Delrin ® Slide Release buckle in front allows for quick and easy "on and off".

Tether not included

Place Order Below

AnglrSavr ^TM

Large - AnglrSavr™ Safety Stand-up Fishing Harness
   33"- 69" waist size • 12" Reinforced Back Support

• 1 - 2" 316 Type Stainless Steel D Ring on back
• 4 - 2" Beastee Dee rings for reel to belt dropstraps (large only)
• 2 - 2" Stainless Steel D rings for reel to belt dropstraps (small only)
• 2" Nylon Webbing
• Padded Shoulder Straps
• Closed Cell Foam Padding
• 2 - Drop Straps Included-Fully Adjustable permanently attached - LARGE Only
• 4 - Drop Straps Included-Fully adjustable SMALL Only
• 2" Quick Release Delrin® buckles in front
• Complies with all IGFA Rules (as long as tether does not become tight during fight)

Tether not included

Place Order Below

---

Anglr Belt ^TM

The Anglr Belt is a lightweight fighting belt, perfect for any type of standup fishing. We highly recommend wearing the MateSaver® Safety Fishing Harness in tandem with this belt. You never know - extreme situations can happen at any time. Always be ready for the unexpected.

Above:  The Black Belt.

Above:  The Black Belt Shown with Angler Pad Fighting Belts

The Black Belt
(50 lb tackle and lighter)

• Lightweight fighting belt, perfect for any type of stand-up fishing

• Can also be worn with the Anglr P.A.D. (Personal Angling Device)

• 5" Kidney support distributes leverage

• 3/4" Closed cell foam padding throughout

• Delrin® quick release buckle for easy adjustment

• One set of dropstraps included

• One Size Fits Most

PURPOSE: To attach Anglr P.A.D. (gimbal belt) and/or reel to your harness.  CONTENTS: 2-37" Drop Straps Black in Color, 2-2" Type 316 Stainless Steel Spring Gate Snaps 2-1" Tension Locks.   COMPATIBLE WITH: MateSaver®, AnglrSavrTM, The Anglr Belt, The Long Ranger Belt & The Anglr P.A.D.  USAGE: A. Harness to reel lugs connection B. Harness to gimbal pad connection

Place Order Below

---

RnR Strap

 

 

Q: I want safety, but I already have a fighting harness belt and don’t really want to change my existing gear right now. Can I use the MateSaverTM as my safety attachment and still use my other gear?

A: Yes. The MateSaverTM fits over the upper torso and will not interfere with your existing fishing harness. The MateSaverTM is One Size Fits All.

Q: I use a bucket harness for angling. How can I be tethered in the cockpit while using the bucket harness (other than tying myself in with a rope)?

A: The MateSaverTM once again can be used without interfering with the bucket harness. Make sure that the tether does not come tight during the angler’s full range of motion. The tether cannot aid the angler during the fight. If the tether does come tight, that is considered "aiding" the angler and is not IGFA compliant.

Q: I just bought the AnglrSavrTM Adult and am not sure what to do with the adaptor strap. What exactly is it for?

A: It is ideal for resting your rod during your fight with light tackle applications such as: spinning rods, fly fishing rods and open face reels.

Q: What are the measurements of MateSaverTM and AnglrSavrTM?

A: The MateSaverTM is One Size Fits All. The chest strap and shoulder straps are fully adjustable. AnglrSavrTM Adult fits waist sizes from 33" - 69" & AnglrSavrTM Junior fits waist sizes 24" - 32"

Q: What is the difference between MateSaverTM and AnglrSavrTM?

A: The main difference between the two harnesses is the AnglrSavrTM is a combination safety harness and fishing harness with a back support. MateSaverTM has no back support and when used alone, it is primarily a wireman’s and gaff man’s piece of equipment.

Q: How do I make sure the straps don’t slip?

A: Once you have made the adjustments and everything feels comfortable, take the excess strapping and fold it back on itself and insert it through the glide adjustment clip and pull tight. This will eliminate any slippage of the strapping.

Q: I bought a harness for each of my crew members. They aren’t going to be adjusting the harnesses anymore and want to eliminate the excess materials from the straps. What should we do?

A: (It’s important that as you make your final adjustments, make sure that you lock down each glide adjustment clip. This is done by taking the excess strapping and folding it back on itself and inserting it through the glide adjustment clip) Now you are ready to cut the excess strapping. The best way to cut the material is with a hot knife. This will keep the strands from fraying. Be sure to use good sense when cutting the material and always keep safety in mind. You can also go to your local canvas store and ask them to cut and seal it for you.

Q: Who should I contact if I have questions once I buy the harnesses?

A: You can contact us at Alltackle.com. Our sales staff has extensive knowledge of the harnesses and the different applications. If you have a question that absolutely stumps everyone - please give Capt. Vinnie a shout. He is the designer and would love to hear from you.

E-Mail Us to criticize this site, request products, and offer comments.

For Product Information, Questions, or To Place A Phone Order, Call Us Toll Free @ 1-888-810-7283 

Alltackle.com, Inc.  Copyright© Alltackle.com, Inc.  All rights reserved.  Web design and optimization by Allopti Interactive - www.allopti.com